Radar sensors Archive - RLS Wacon analytics https://rls-wacon.de/product-category/fahrtreppe/radarsensoren/ Experts for water monitoring Mon, 16 Feb 2026 15:49:55 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://rls-wacon.de/wp-content/uploads/2024/04/cropped-Kreis_logo_gross-32x32.png Radar sensors Archive - RLS Wacon analytics https://rls-wacon.de/product-category/fahrtreppe/radarsensoren/ 32 32 Radar sensor RMS-C https://rls-wacon.de/en/produkt/radar-sensor-rms-c/ Tue, 24 Oct 2023 15:04:32 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-c/ The RMS-C radar sensor serves as a motion detector for approaching objects. The detection range is between approx. 0.5m and 5.0m. The range is set at the factory according to customer requirements and varies depending on the size, shape and speed of the moving objects.

Special features are:

  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-C radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Motion detection

 

Der Beitrag Radar sensor RMS-C erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 46 x 70 x 23 mm

 

Parameter Value min. typ. max.
Detection range 0,5 m 2,5 m 5,0 m
Beam angle, horizontal 80 °
Beam angle, vertical 32 °
Frequency 24 GHz
Transmission power 15 dBm EIRP
Signal output active low / push pull 200 mA
Connection cable 1 m LIYY 3 x 0.25 m²
direction approximately
Antenna alignment 0°

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Assignment
brown + 24 V DC
white GND
green Sensor output

Der Beitrag Radar sensor RMS-C erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-CV-Adj https://rls-wacon.de/en/produkt/radar-sensor-rms-cv-adj/ Tue, 24 Oct 2023 15:04:32 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-cv-adj/ The RMS-CV-Adj radar sensor with adjustable sensitivity serves as a motion detector for approaching objects. It can be mounted directly in the application. The optimum sensitivity can then be set precisely.

Special features are:

  • Simple adjustment of the sensitivity at the place of use
  • Adjustable switching time for object detection
  • Insensitive to lateral movements
  • Selection of the measuring range by horizontal or vertical mounting
  • Wide input voltage range
  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-CV-Adj radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Motion detection

 

Der Beitrag Radar sensor RMS-CV-Adj erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 56 x 46 x 22 mm

 

Parameter Value min. typ. max.
Detection range 0,5 m 5,0 m
Beam angle, horizontal 80 °
Beam angle, vertical 32 °
Frequency 24 GHz
Transmission power 15 dBm EIRP
Signal output active low / optocoupler, cascadable
Connection cable 5 m LIYY 4 x 0.25 m²
direction approximately
Antenna alignment 0°
Status LED rear side

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Assignment
brown + 24 V DC
white GND
green Output optocoupler –
yellow Output optocoupler +

Der Beitrag Radar sensor RMS-CV-Adj erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-CV-LR https://rls-wacon.de/en/produkt/radar-sensor-rms-cv-lr/ Tue, 24 Oct 2023 15:04:32 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-cv-lr/ The RMS-CV-LR radar sensor serves as a motion detector for approaching objects. The detection range is between approx. 0.5m and 5.0m. The range is set at the factory according to customer requirements and varies depending on the size, shape and speed of the moving objects.

Special features are:

  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

The RMS-CV-LR radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Motion detection

Der Beitrag Radar sensor RMS-CV-LR erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 56 x 46 x 22 mm
Parameter Value min. typ. max.
Detection range 1,5 m
Beam angle, horizontal 80 °
Beam angle, vertical 32 °
Frequency 24 GHz
Transmission power 15 dBm EIRP
Signal output active low, optocoupler/ normally closed contact, cascadable
Connection cable 5 m LIYY 4 x 0.25 m²
direction approximately
Antenna alignment 0°
Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1
Color Assignment
brown + 24 V DC
white GND
green Output optocoupler –
yellow Output optocoupler +

Der Beitrag Radar sensor RMS-CV-LR erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-C-V https://rls-wacon.de/en/produkt/radar-sensor-rms-c-v/ Tue, 24 Oct 2023 15:04:32 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-c-v/ The RMS-C-V radar sensor serves as a motion detector for approaching objects. The detection range is between approx. 0.5m and 5.0m. The range is set at the factory according to customer requirements and varies depending on the size, shape and speed of the moving objects.

Special features are:

  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-C-V radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Motion detection

 

Der Beitrag Radar sensor RMS-C-V erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 56 x 46 x 22 mm

 

Parameter Value min. typ. max.
Detection range 0,5 m 2,5 m 5,0 m
Beam angle, horizontal 80 °
Beam angle, vertical 32 °
Frequency 24 GHz
Transmission power 15 dBm EIRP
Signal output active low, optocoupler/ normally closed contact, cascadable
Connection cable 5 m LIYY 4 x 0.25 m²
direction approximately
Antenna alignment 0°

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Assignment
brown + 24 V DC
white GND
green Output optocoupler –
yellow Output optocoupler +

Der Beitrag Radar sensor RMS-C-V erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-AT https://rls-wacon.de/en/produkt/radar-sensor-rms-at/ Tue, 24 Oct 2023 15:04:31 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-at/ The RMS-AT radar sensor serves as a motion detector for approaching objects. The detection range is between approx. 0.5m and 5.0m. The range is set at the factory according to customer requirements and varies depending on the size, shape and speed of the moving objects.

Special features are:

  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-AT radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Motion detection

 

Der Beitrag Radar sensor RMS-AT erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 56 x 46 x 22 mm

 

Parameter Value min. typ. max.
Detection range 0,5 m 2,5 m 5,0 m
Beam angle, horizontal 80 °
Beam angle, vertical 32 °
Frequency 24 GHz
Transmission power 15 dBm EIRP
Signal output active low / push pull 200 mA
Connection cable 1 m LIYY 3 x 0.25 m²
direction approximately
Antenna alignment 0°

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Assignment
brown + 24 V DC
white GND
green Sensor output

Der Beitrag Radar sensor RMS-AT erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-2 (M12) https://rls-wacon.de/en/produkt/radar-sensor-rms-2-m12/ Tue, 24 Oct 2023 15:04:31 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-2-m12/ The RMS-2 radar sensor (M12) with adjustable sensitivity is a motion detector. Unlike other sensors, the RMS-2 distinguishes between approaching and receding objects. This information is available to the user via two separate switching outputs. The sensitivity of the device can be configured in four stages via an internal jumper strip. The RMS-2 (M12) is connected via a standard industrial plug connector.

Special features are:

  • Simple adjustment of the sensitivity at the place of use
  • Adjustable switching time for object detection
  • Insensitive to lateral movements
  • Selection of the measuring range by horizontal or vertical mounting
  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-2 radar sensor (M12) is used in the following areas in particular:

  • Access and access control
  • Gate control
  • Person and object recognition
  • Direction-sensitive motion detection

 

Der Beitrag Radar sensor RMS-2 (M12) erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 30 °C 80 °C
Protection class IP 66
Housing material PC
Dimensions 65 x 50 x 35 mm

 

Parameter Value min. typ. max.
Detection range 1 m 6 m
Beam angle, horizontal 70 °
Beam angle, vertical 36 °
Transmission power 100 mW EIRP
Signal output active low/high, push pull
Adjustable output pulse length 1 s, 5 s, 10 s, 30 s
Connection M12 male, 4-pin
Direction approximate and/or distant
Antenna alignment 0°
Status LED internal

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Pin M12 Signal
1 10 … 30 V DC
2 approximately
3 Mass
4 removing

Der Beitrag Radar sensor RMS-2 (M12) erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-AT-Adj https://rls-wacon.de/en/produkt/radar-sensor-rms-at-adj/ Tue, 24 Oct 2023 15:04:31 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-at-adj/ The RMS-AT-Adj radar sensor with adjustable sensitivity serves as a motion detector for approaching objects. It can be mounted directly in the application. The optimum sensitivity can then be set precisely.

 

Special features are:

  • Simple adjustment of the sensitivity at the place of use
  • Adjustable switching time for object detection
  • Insensitive to lateral movements
  • Selection of the measuring range by horizontal or vertical mounting
  • Wide input voltage range
  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-AT-Adj radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Motion detection

Der Beitrag Radar sensor RMS-AT-Adj erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 56 x 46 x 22 mm

 

Parameter Value min. typ. max.
Detection range 0,5 m 5,0 m
Beam angle, horizontal 80 °
Beam angle, vertical 32 °
Frequency 24 GHz
Transmission power 15 dBm EIRP
Signal output active low / optocoupler, cascadable
Connection cable 5 m LIYY 4 x 0.25 m²
direction approximately
Antenna alignment 0°
Status LED rear side

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Assignment
brown + 24 V DC
white GND
green Output optocoupler –
yellow Output optocoupler +

Der Beitrag Radar sensor RMS-AT-Adj erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-B https://rls-wacon.de/en/produkt/radar-sensor-rms-b/ Tue, 24 Oct 2023 15:04:31 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-b/ The RMS-B radar sensor with adjustable sensitivity serves as a motion detector for approaching objects. The detection range is between approx. 0.5 m and 5.0 m. The main detection area is inclined at an angle of 25° to the sensor surface. The sensitivity can be adjusted using a potentiometer in a terminal box (RMS-KK) supplied.

Special features are:

  • Output open collector, active low
  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-B radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Direction-sensitive motion detection

 

Der Beitrag Radar sensor RMS-B erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption  < 1 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 46 x 70 x 44 mm

 

Parameter Value min. typ. max.
Detection range 0,5 m 5 m
Beam angle, horizontal 70 °
Beam angle, vertical 36 °
Frequency 24 GHz
Transmission power 100 mW EIRP
Signal output active low, push pull
Connection cable 2 m LIYY 5 x 0.34 m²
direction approximately
Antenna alignment 25°

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Assignment
brown + 24 V DC
white GND
green Sensor output
yellow Sensitivity switch 1
gray Sensitivity switch 2

 

Color Assignment Remark
brown + 24 V DC for control
white GND for control
green Sens_Outp for control
brown + 24 V DC for RMS-B
white GND to RMS-B
green Sens_Out to RMS-B
yellow SensSwich1 to the RMS-B
gray SensSwitch2 to the RMS-B

Der Beitrag Radar sensor RMS-B erschien zuerst auf RLS Wacon analytics.

]]> Radar sensor RMS-A https://rls-wacon.de/en/produkt/radar-sensor-rms-a/ Tue, 24 Oct 2023 15:04:31 +0000 https://new.rls-wacon.de/produkt/radar-sensor-rms-a/ The RMS-A radar sensor serves as a motion detector for approaching objects. The detection range is between approx. 0.5m and 5.0m. The range is set at the factory according to customer requirements and varies depending on the size, shape and speed of the moving objects.

Special features are:

  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-A radar sensor is used in the following areas in particular:

  • Access control
  • Gate control
  • Person and object recognition
  • Motion detection

 

Der Beitrag Radar sensor RMS-A erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 24 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 20 °C 60 °C
Protection class IP 67
Housing material PC
Dimensions 56 x 46 x 22 mm

 

Parameter Value min. typ. max.
Detection range 0,5 m 2,5 m 5,0 m
Beam angle, horizontal 80 °
Beam angle, vertical 32 °
Frequency 24 GHz
Transmission power 15 dBm EIRP
Signal output active high / push pull 200 mA
Connection cable 1 m LIYY 3 x 0.25 m²
direction approximately
Antenna alignment 0°

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Assignment
brown + 24 V DC
white GND
green Sensor output

Der Beitrag Radar sensor RMS-A erschien zuerst auf RLS Wacon analytics.

]]> RMS-2 radar sensor (cable) https://rls-wacon.de/en/produkt/rms-2-radar-sensor-cable/ Tue, 24 Oct 2023 15:04:30 +0000 https://new.rls-wacon.de/produkt/rms-2-radar-sensor-cable/ The RMS-2 radar sensor (cable) with adjustable sensitivity is a motion detector. Unlike other sensors, the RMS-2 distinguishes between approaching and receding objects. This information is available to the user via two separate switching outputs. The sensitivity of the device can be configured in four stages via an internal jumper strip. The RMS-2 (cable) is connected via a pre-assembled connection cable.

Special features are:

  • Simple adjustment of the sensitivity at the place of use
  • Adjustable switching time for object detection
  • Insensitive to lateral movements
  • Selection of the measuring range by horizontal or vertical mounting
  • Low power consumption
  • Concealed installation possible
  • maintenance-free
  • Simple assembly

 

The RMS-2 radar sensor (cable) is used in the following areas in particular:

  • Access and access control
  • Gate control
  • Person and object recognition
  • Direction-sensitive motion detection

 

Der Beitrag RMS-2 radar sensor (cable) erschien zuerst auf RLS Wacon analytics.

]]>
Parameter Value min. typ. max.
Operating voltage 10 VDC 30 VDC
Power consumption 0,5 W
Temperature range – 30 °C 80 °C
Protection class IP 66
Housing material PC
Dimensions 65 x 50 x 35 mm

 

Parameter Value min. typ. max.
Detection range 1 m 6 m
Beam angle, horizontal 70 °
Beam angle, vertical 36 °
Transmission power 100 mW EIRP
Signal output active low/high, push pull
Adjustable output pulse length 1 s, 5 s, 10 s, 30 s
Connection cable 2 m LIYY 4 x 0.25 m²
Direction approximate and/or distant
Antenna alignment 0°
Status LED internal

 

Standard
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Color Signal
brown 10 … 30 V DC
yellow approximate
white Mass
green removing

Der Beitrag RMS-2 radar sensor (cable) erschien zuerst auf RLS Wacon analytics.

]]>