Our telephone system is currently out of service due to line work. You can reach us by e-mail at info@rls-wacon.de or by calling +49 (0)151/1054 1979 --- Our telephone system is currently out of service due to line work. You can reach us by e-mail at info@rls-wacon.de or by calling +49 (0)151/1054 1979 --- Our telephone system is currently out of service due to line work. You can reach us by e-mail at info@rls-wacon.de or by calling +49 (0)151/1054 1979 ---

IRSS88T precipitation sensor

Article number: 
Category
Quantity
Add to Quote
Reagent for IRSS88T precipitation sensor:

The IRSS88T precipitation sensor also has an integrated temperature measurement and a serial interface (RS232). The IRSS88T has a separate temperature sensor in an aluminum attachment on the core housing. This makes it possible to measure the ambient temperature to an accuracy of 0.1°C and to control a potential-free switching output via a switching hysteresis function. The hysteresis can be set as required between 0°C and 9°C using two rotary selector switches.

Special features are:

  • Insensitive to interfering light
  • Connection cable up to 1000 m possible
  • Low power consumption
  • Stainless steel housing, painted brown
  • Fast response time
  • Extremely robust

 

The IRSS88T precipitation sensor is used in the following areas in particular:

  • Traffic control systems
  • Sewage treatment plants
  • Facility management
  • Research vessels in the Arctic Circle

 


Parameters Value / Range min. type. max.
Operating voltage   9 V DC   32 V DC
Power consumption 100 @ 12 V DC   145 mA  
Temperature range   -25°C   60°C
Protection class IP 68      
Housing material Stainless steel / aluminum      
Dimensions approx. 170 x 250 x 85 mm      
Weight approx. 1800 g      

 


Parameters Value / Range Remarks
Detection area 3000 mm²  
Sensor principle 2-channel IC sensor  
Signal inputs

Temperature+

Precipitation+

Potential-free input: with switched relay see “Temperature-“

Potential-free input: with switched relay, see “Precipitation”

Signal outputs

Temperature

Precipitation

POUT

TX

RX

potential-free output: with set switching shaft = TEMP_IN. Reset takes place via a temperature span ^T

Floating output: when precipitation is detected = “Precipitation+”. Imax of the relays = 900 MA resistive load

Pulse output: pulse/particle. Active HIGH, Vout = 9 V … Vcc

RS232 compatible interface output. 9600 baud, 8N1

RS232 compatible interface input.

Temperature sensor   Measuring range -10°C – 60°C with 0.1°C resolution over the entire measuring range

Additional information

Weight 0,0000 kg
Dimensions 0,0000 × 0,0000 × 0,0000 cm
Flyer
Operating instructions

Reagent for IRSS88T precipitation sensor: