Comb lighting KL70-W
Comb Lighting KL70-W. The use of LEDs in the KL70-W comb lighting ensures a long service life. The special design of the diffusers produces homogeneous illumination.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Comb lighting KL70-W:
See also:
Comb Lighting KL70-W
The use of LEDs in the KL70-W comb lighting ensures a long service life. The special design of the diffusers produces homogeneous illumination.
Use on escalators and moving walks
Comb lighting from RLS Wacon illuminates the comb area at the entry and exit of escalators. The bright, coloured LED lighting makes the comb line clearly visible, thereby increasing the safety of passengers when entering and leaving the unit – with low energy consumption and a long service life.
Features
- very bright LED lighting
- extremely robust electrical design, no damage to the LEDs from electrical fluctuations
- durable
- insensitive to soiling
- waterproof up to IP 67
Areas of application
Field of use
The comb lighting is mounted on the comb in the entry and exit areas of the escalator and illuminates the comb and step entry area. The clearly visible, homogeneous illumination increases passenger safety when stepping on and off the unit.
Operating principle
Super-bright, high-quality and particularly durable SMD LEDs are used. The extremely robust electrical design protects the LEDs from damage caused by voltage fluctuations. The light is insensitive to dirt, waterproof up to IP67 and designed for a temperature range of −20 … +60 °C. Depending on the version in yellow, white or green – some with flashing mode or switchable red/green.
Installation
- Mount the light in the comb area of the escalator (mechanical adaptation to the structural conditions).
- Connect the operating voltage according to the pin assignment (see Technical data).
- For versions with flashing mode or colour switching, connect the corresponding control input.
Maintenance & cleaning
- Regularly inspect the light and the front lens visually.
- Clean the front lens with a soft, lint-free cloth if dirty.
- Robust, durable design – low maintenance effort.
Good to know
Thanks to in-house production in Hildesheim, individual lighting concepts and special versions are possible. Detailed technical data sheets are available on request.
Important notes
- Observe the operating voltage and pin assignment for each type (see Technical data).
- Install only when de-energised.
Technical Data
| Parameter | Value |
|---|---|
| Part number | 80-000665 |
| Operating voltage | 16 … 28 V AC/DC |
| Power consumption | 6 VA |
| Ambient temperature | -20°C to 60 °C |
| Protection class | IP 67 |
| Dimensions | 232 x 50 mm |
| Installation depth | 49 mm |
| Weight | 470 g |
| LED colour | white |
| Luminous intensity | 580 lx (0,5 m distance) |
| Front lens | PC, satin-finished |
| Front lens dimensions | 182 x 37 mm |
| Contour height | 2 mm |
| Supply cable | 2 x 0.75 mm², length 30 cm, Ölflex |
| Connector | HAN 3A (STI), metal |
| Pin | Assignment |
| Pin 1 | Vcc |
| Pin 2 | Vcc |
| Pin 3 | not connected |
Additional information
Flyer
Operating instructions
Similar articles:
Related products
-
Comb lighting KL80 SNComb Lighting KL80 SN. The visible cutout of the front lens of the KL80 SN comb lighting is inclined to the left. The use of LEDs in the KL80 SN comb lighting ensures a long service life. -
Comb lighting KLG102Comb Lighting KLG102. The use of LEDs in the KLG102(-A) comb lighting ensures a long service life. -
Comb lighting KLT102Comb Lighting KLT102. The visible cutout of the front lens of the KLT102(-A) comb lighting is arranged asymmetrically. The use of LEDs in the KLT102(-A) comb lighting ensures a long service life.
