SYCON in comparison

Functional principle:
Limit value:
Parameters:
Units:
Reagent consumption:
Measuring point/range:
(see Reagent)
Fully automatic operation
BOB - FunctionalityTheanalyzer indicates whether there is a sufficient supply of Reagent for at least the next 72 hours.
Diagnostic program
Time-controlled analysis interval
Quantity-controlled analysis interval
Measured value log on SD card
Modbus RTU interface
Analog output (4 ... 20 mA)
Relay functions
Limit value 1
Limit value 2
Analysis active / cooling water
Operational readinessWhen the analyzer is switched on, one of the relays picks up. This allows an external control system to recognize whether the device is ready for operation or whether there is a fault such as a device malfunction, power failure or line defect.
BOB Warning
Input functions
Flow monitor
Interval resetRecommended for pendulum softeners. A running analysis can be interrupted via the input when switching to the other water softener. This ensures that the measurement result is always assigned to the correct system by the control unit.
External analysis start
Analysis termination
Water meter

Limit value device
The analyzer determines whether a water hardness limit value has been reached (good/bad measurement).
Limit value is determined by the Reagent used.
determined by Reagent
Total hardness, Alkalinity
°dH, °f, °e, ppm, mmol/l, °Ж
<0.1 ml / analysis
min. 5000 analyses / 500 ml
Reagent
The analyzer indicates whether there is a sufficient supply of Reagent for at least the next 72 hours.
When the analyzer is switched on, one of the relays picks up. This allows an external control system to recognize whether the device is ready for operation or whether there is a fault such as a device malfunction, power failure or line defect.
Recommended for pendulum softeners. A running analysis can be interrupted via the input when switching to the other water softener. This ensures that the measurement result is always assigned to the correct system by the control unit.

Titration device
The analyzer measures the water hardness within a certain measuring range and gives an accurate result.
The measuring range is determined by the Reagent used.
an adjustable limit value
Total hardness, Alkalinity
°dH, °f, °e, ppm, mmol/l, °Ж
<0.05 ml / analysis
min. 10000 analyses / 500 ml
Reagent
The analyzer indicates whether there is a sufficient supply of Reagent for at least the next 72 hours.
When the analyzer is switched on, one of the relays picks up. This allows an external control system to recognize whether the device is ready for operation or whether there is a fault such as a device malfunction, power failure or line defect.
Recommended for pendulum softeners. The input can be used to cancel a running analysis when switching to the other water softener. This ensures that the measurement result is always assigned to the correct system by the control unit.

Titration device
The analyzer measures the water hardness within a certain measuring range and gives an accurate result.
The measuring range is determined by the Reagent used.
Two adjustable limit values
Total hardness, Alkalinity
°dH, °f, °e, ppm, mmol/l, °Ж
<0.05 ml / analysis
min. 10000 analyses / 500 ml
Reagent
The analyzer indicates whether there is a sufficient supply of Reagent for at least the next 72 hours.
When the analyzer is switched on, one of the relays picks up. This allows an external control system to recognize whether the device is ready for operation or whether there is a fault such as a device malfunction, power failure or line defect.
Recommended for pendulum softeners. A running analysis can be interrupted via the input when switching to the other water softener. This ensures that the measurement result is always assigned to the correct system by the control unit.

Limit value device
The analyzer determines whether a water hardness limit value has been reached (good/bad measurement).
Limit value is determined by the Reagent used.
determined by Reagent
Total hardness, Alkalinity
°dH, °f, °e, ppm, mmol/l, °Ж
<0.1 ml / analysis
min. 5000 analyses / 500 ml
Reagent

Titration device
The analyzer measures the water hardness within a certain measuring range and gives an accurate result.
The measuring range is determined by the Reagent used.
an adjustable limit value
Total hardness, Alkalinity
°dH, °f, °e, ppm, mmol/l, °Ж
<0.05 ml / analysis
min. 10000 analyses / 500 ml
Reagent

Titration device
The analyzer measures the water hardness within a certain measuring range and gives an accurate result.
The measuring range is determined by the Reagent used.
Two adjustable limit values
Total hardness, Alkalinity
°dH, °f, °e, ppm, mmol/l, °Ж
<0.05 ml / analysis
min. 10000 analyses / 500 ml
Reagent

Address