Bi-color traffic light RGS6031
Bi-Color signal light RGS6031. Red/green switchable signal light. High optical contrast, low power consumption, homogeneous illumination.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Bi-color traffic light RGS6031:
See also:
Bi-Color signal light RGS6031
The Bi-Color signal light RGS6031 is a red/green switchable signal light. It offers high optical contrast with low power consumption and homogeneous illumination.
Use at escalators and moving walks
Direction-of-travel indicators from RLS Wacon signal the direction of travel or release of the unit to passengers at escalators and moving walks. Depending on the operating direction, it lights up red or green and blocks or clears entry. Depending on the version, it is installed in the balustrade, round or square column or base. The bright, homogeneous LED illumination remains clearly visible even in ambient light; no symbols are visible when de-energised. A curved, replaceable front lens and a wide input voltage range ensure robust continuous operation.
Features
- switchable red/green
- for installation in square columns or base with 60 mm diameter
- flat front lens, replaceable
- wide input voltage range
- robust and durable
- no symbols visible when de-energised
- special version for 12 V available
Areas of application
Field of use
The bi-color traffic light is mounted on the access side of escalators and moving walks. As a single light, it switches between red (unit blocked) and green (unit cleared), thus replacing two separate signal lights.
Operating principle
The display uses backlit LEDs and offers high optical contrast with homogeneous illumination and low power consumption. Nothing is visible on the display when de-energised. The colour is switched between red and green via the control. Optionally, the traffic light is available with function monitoring for connection to a remote diagnostics system.
Installation
- Insert the traffic light into the cut-out provided in the square column or base plate.
- Connect the operating voltage (see Technical data).
- For versions with function monitoring, connect the monitoring output to the remote diagnostics system.
Maintenance & cleaning
- Regularly inspect the front lens and display visually.
- Clean the front lens with a soft cloth if dirty – the front lens is replaceable.
- For versions with function monitoring: check fault messages in the remote diagnostics system.
Important notes
- Nothing is visible on the display when de-energised.
- Order fastening material separately (traffic light fastening set).
- Install only when de-energised.
Technical data
| Parameter | Value |
|---|---|
| Article number | 80-000560 |
| Operating voltage | 16 … 28 V AC/ 16 … 36 V DC |
| Power consumption | typ. 1.8 VA |
| Ambient temperature | -20 °C to 60 °C |
| Protection class | IP 67 |
| Installation depth | 65 mm |
| LED colour | red / green |
| Luminous intensity | typ. 60 lx (0.5 m distance) |
| LED service life | 50,000 h |
| Front lens | d = 60 mm, flat |
| Connection | 3 x 0.5 mm², length 30 cm, wire end ferrules |
Additional information
Flyer
Operating instructions
Similar articles:
Related products
-
Multifunction Signal. Consists of 97 RGB LEDs. The LEDs are arranged homogeneously across the entire display area. -
- Bi-color, switchable red/green
- for balustrades
- Front lens Ø 60 mm
- with optional function monitoring
-
