Calibration solution Conductivity 84 μS/cm
Conductivity calibration solution with a defined standard value of 84 µS/cm for calibrating conductivity meters.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Calibration solution Conductivity 84 μS/cm:
See also:
Conductivity Calibration Solution 84 µS/cm
Ready-to-use standard solution with a defined conductivity of 84 µS/cm for calibrating conductivity meters.
Why do you need a conductivity calibration solution?
The measuring cell of a conductivity meter is subject to ageing and contamination, which can cause the displayed values to deviate. To ensure accurate readings, the device is calibrated regularly against a solution with an exactly known conductivity – here 84 µS/cm.
How do you calibrate with it?
The measuring cell is immersed in the standard solution and the reading on the device is adjusted to 84 µS/cm. This solution covers the low conductivity range (e.g. ultrapure/permeate water).
- Defined standard value 84 µS/cm
Precise reference for calibrating conductivity meters
- Universally applicable
Suitable for all common conductivity/TDS meters
- Regular calibration
Ensures consistently accurate and reproducible results
- Ready to use
Ready for immediate use – no preparation or dilution required
- Rinse the measuring cell/electrode with distilled water and dab it dry carefully
- Pour a small amount of standard solution into a clean container (do not measure directly in the storage bottle)
- Immerse the measuring cell in the 84 µS/cm solution and allow the reading to stabilise
- Calibrate the meter to the setpoint of 84 µS/cm
- Rinse the measuring cell after calibration
Tip for best results
Conductivity is temperature-dependent – use the solution at room temperature if possible (approx. 25 °C). Discard the portion taken after use, do not pour it back into the storage bottle.
Important notes
- Reseal the bottle immediately after use
- Observe the best-before date – use up opened solutions promptly
- Store in a cool, dry place away from light
Specifications at a glance
| Property | Value |
|---|---|
| Type | Conductivity calibration solution (standard solution) |
| Conductivity (setpoint) | 84 µS/cm |
| Article number | 31-078016 |
| Application | Calibration of conductivity meters |
| Condition | Ready to use |
Scope of delivery
| Conductivity Calibration Solution 84 µS/cm | 1 bottle, ready to use |
Additional information
| Weight | 0,0000 kg |
|---|---|
| Dimensions | 0,0000 × 0,0000 × 0,0000 cm |
Flyer
Operating instructions
Similar articles:
Related products
-
Hanna Dist 3Waterproof conductivity pocket tester Hanna Dist® 3 with ATC – conductivity 0–2000 µS/cm, resolution 1 µS/cm, for quick on-site measurements. -
Calibration solution conductivity 1412 μS/cmConductivity calibration solution with a defined standard value of 1412 µS/cm for calibrating conductivity meters.
