Comb lighting KL60-W
Comb Lighting KL60-W. Fitted with super-bright, high-quality and particularly long-lasting LEDs. Mechanical adaptation to your local conditions is possible at any time.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Comb lighting KL60-W:
See also:
Comb Lighting KL60-W
The KL60-W comb lighting is fitted with super-bright, high-quality and particularly long-lasting LEDs. Mechanical adaptation to your local conditions is possible at any time.
Use on escalators and moving walkways
Comb lighting from RLS Wacon illuminates the comb area at the entry and exit of escalators. The bright, coloured LED lighting makes the comb line clearly visible and thus increases the safety of passengers when entering and leaving the unit – with low energy consumption and a long service life.
Features
- extremely robust electrical design
- no damage to the LEDs from electrical fluctuations
- insensitive to soiling
- waterproof up to IP 67
Areas of application
Field of use
The comb lighting is mounted on the comb in the entry and exit areas of the escalator and illuminates the comb and step entry area. The clearly visible, homogeneous illumination increases passenger safety when stepping on and off the unit.
Operating principle
Super-bright, high-quality and particularly durable SMD LEDs are used. The extremely robust electrical design protects the LEDs from damage caused by voltage fluctuations. The light is insensitive to dirt, waterproof up to IP67 and designed for a temperature range of −20 … +60 °C. Depending on the version in yellow, white or green – some with flashing mode or switchable red/green.
Installation
- Mount the light in the comb area of the escalator (mechanical adaptation to the structural conditions).
- Connect the operating voltage according to the pin assignment (see Technical data).
- For versions with flashing mode or colour switching, connect the corresponding control input.
Maintenance & cleaning
- Regularly inspect the light and the front lens visually.
- Clean the front lens with a soft, lint-free cloth if dirty.
- Robust, durable design – low maintenance effort.
Good to know
Thanks to in-house production in Hildesheim, individual lighting concepts and special versions are possible. Detailed technical data sheets are available on request.
Important notes
- Observe the operating voltage and pin assignment for each type (see Technical data).
- Install only when de-energised.
Technical Data
| Parameter | Value |
|---|---|
| Article number | 80-000632 |
| Operating voltage | 22 … 28 V AC/DC |
| Power consumption | 4 VA |
| Ambient temperature | -20 °C to 60 °C |
| Protection rating | IP 67 |
| Dimensions | 212 x 45 mm |
| Installation depth | 22 mm |
| Weight | 200 g |
| LED colour | white |
| Illuminance | 500 lx (1 m distance) |
| Front lens | PMMA Plexiglas, clear |
| Front lens dimensions | 150 x 28 mm |
| Contour height | 3 mm |
| Supply cable | 3 x 0.5 mm², length 20 cm, Ölflex, wire end ferrules |
| Wire | Assignment |
| Wire 1 | Vcc |
| Wire 2 | Vcc |
| Wire 3 | not assigned |
Additional information
Flyer
Operating instructions
Similar articles:
Related products
-
Comb lighting KL80-QComb Lighting KL80-Q. The use of LEDs in the KL80-Q comb lighting ensures a long service life. -
Comb lighting KLT76Comb Lighting KLT76. The red/green switchable KLT76-G/R comb lighting is fitted with super-bright, high-quality and especially long-life LEDs. Mechanical adaptation to your on-site conditions is possible at any time. -
Comb lighting KL80 RNComb Lighting KL80 RN. The visible cutout of the front lens of the KL80 RN comb lighting is inclined to the right. The use of LEDs in the KL80 RN comb lighting ensures a long service life.
