ELPB192
ELPB192. The animated direction-of-travel indicator ELPB192 combines arrow and one-way display in a single product. Both the arrow and the stop symbol are animated.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for ELPB192:
See also:
ELPB192
The animated direction-of-travel indicator ELPB192 combines arrow and one-way display in a single product. Both the arrow and the stop symbol are animated. The elliptical LED display can be switched between a green animated arrow and a no-entry symbol with a flashing option.
Use at escalators and moving walks
Direction-of-travel indicators from RLS Wacon signal the direction of travel or release of the unit to passengers at escalators and moving walks. The illuminated symbol shows passengers the permitted direction of travel. Depending on the version, it is installed in the balustrade, round or square column or base. The bright, homogeneous LED illumination remains clearly visible even in ambient light; no symbols are visible when de-energised. A curved, replaceable front lens and a wide input voltage range ensure robust continuous operation.
Features
- for installation in the skirting panel of escalators or in square columns
- very bright illumination
- flat front lens
- wide input voltage range
- robust and durable
- no symbols visible when de-energised
- special version for 12 V available
- indication of access authorisation
- direction indication
Areas of application
Field of use
The animated ELPB192 direction indicator is designed for installation in the base plate or a square column on the access side of escalators. It combines a direction arrow and a one-way/stop symbol in one device and shows passengers the cleared or blocked direction of the unit.
Operating principle
The arrow and stop symbols are animated; three display modes can be switched: stop, stop flashing and operation. The display is very bright and high-contrast. No symbol is visible when de-energised.
Installation
- Insert the indicator into the base plate or square column (flat front lens).
- Connect the operating voltage (see Technical data).
- Switch the required display mode via the control (stop / stop flashing / operation).
Maintenance & cleaning
- Regularly inspect the front lens and display visually.
- Clean the front lens with a soft cloth if dirty – the front lens is replaceable.
- For versions with function monitoring: check fault messages in the remote diagnostics system.
Important notes
- No symbol is visible when de-energised.
- Special version for 12 V available on request.
- Install only when de-energised.
Technical data
| Parameter | Value |
|---|---|
| Article number | 80-000550 |
| Operating voltage | 18 … 28 VAC |
| Ambient temperature | -20 °C to 60 °C |
| Protection class | IP 65 |
| Dimensions | 150 x 86 mm |
| LED colour | red / green |
| Supply cable | length 30 cm |
Additional information
Flyer
Operating instructions
Similar articles:
Related products
-
RB7400 Direction Indicator. With optional function monitoring; backlit directional arrow. High visual contrast, low power consumption, homogeneous illumination. -
- One-way symbol (bar)
- for round columns (Ø 114 mm)
- Front lens Ø 70 mm
- Symbol colour white/yellow
- with optional function monitoring
-
Multifunction Signal. Consists of 97 RGB LEDs. The LEDs are arranged homogeneously across the entire display area.
