Fit 3000
Special cleaner for the acrylic-glass measuring chamber of SYCON analysers – dissolves deposits and maintains measuring accuracy.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Fit 3000:
See also:
FIT 3000 Cleaner – special cleaner for the measuring chamber of SYCON analysers
Why clean the measuring chamber regularly?
The online analysers of the SYCON series measure through a measuring chamber made of acrylic glass. During continuous operation, deposits and incrustations can form there and impair the measurement. Regular cleaning of the measuring chamber keeps your analyser reliable and the measurement results accurate.
What is the FIT 3000 cleaner?
The FIT 3000 cleaner was developed specifically for cleaning the acrylic-glass measuring chamber of the SYCON series analysers. It is also suitable for cleaning other acrylic-glass parts. FIT 3000 is an irritant cleaning fluid – appropriate protective equipment must be worn when handling it. The bottle contains 1000 ml (1 litre).
Note: Before using it on other parts, test its suitability – especially on non-removable parts made of other materials and on bonded joints. No liability is accepted.
Benefits at a glance
- Developed specifically for the acrylic-glass measuring chamber of SYCON devices
- Dissolves deposits and stubborn incrustations
- Maintains the measuring accuracy of the analysers
- Also suitable for other acrylic-glass parts
- Practical 1-litre bottle
Cleaning interval
How often the measuring chamber should be cleaned depends on the device type as well as on the ambient conditions and the water quality. Guide values per device:
| Device type | Cleaning the measuring chamber |
|---|---|
| SYCON 2502 / 2602 | every 6 months |
| SYCON 2702 / 2802 / P | every 6 months |
| SYCON Fe | every 3 months |
| SYCON SiO2 | every 4 weeks |
| SYCON BoB | every 6 months |
At high water or ambient temperatures, or with organically contaminated water, the cleaning intervals may need to be shortened. Cleaning the measuring chamber takes about 20 minutes.
How to clean the measuring chamber
- Observe the regulations for handling irritant cleaning fluids (protective gloves, safety goggles).
- Remove all plugged-in and screwed-in parts from the measuring chamber – except the fastening pins.
- Pour FIT 3000 cleaning fluid into the cleaning tray.
- Wet the measuring chamber with the fluid and let it act depending on the degree of soiling (up to 24 hours for heavy soiling).
- Remove stubborn incrustations with a brush.
Note: After reinstallation, air bubbles initially form on the inner wall of the measuring path; these dissolve after about 1 to 2 days.
⚠️ Safety note
FIT 3000 is an irritant cleaning fluid. Wear protective gloves and safety goggles and observe the safety data sheet.
Technical data
| Property | Value |
|---|---|
| Purpose | Cleaning the acrylic-glass measuring chamber |
| Suitable for | SYCON series analysers (also other acrylic-glass parts) |
| Contents | 1000 ml (1 litre) |
| Property | irritant cleaning fluid |
| Article number | 32-089100 |
Additional information
| Product category | Accessories, Cleaning/maintenance |
|---|---|
| Series | SYCON |
Flyer
Operating instructions
Similar articles:
Related products
-
Precisely fitting protective housing (IP54) for the SYCON analysers – protects the electronics against dust, moisture and mechanical damage. -
Flow restrictor with integrated strainer insert for the sample-water inlet – limits the flow and filters out foreign matter for stable measurements (up to 4 bar inlet pressure). -
