Multifunctional traffic light
Multifunction Signal. Consists of 97 RGB LEDs. The LEDs are arranged homogeneously across the entire display area.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Multifunctional traffic light:
See also:
Multifunction Signal
The Multifunction Signal consists of 97 RGB LEDs. The LEDs are arranged homogeneously across the entire display area. Each individual LED can display any colour. In addition, the displayed symbols can be animated. The Multifunction Signal can display up to three switchable symbols. For connection to a remote diagnostics system, the Multifunction Signal is available with function monitoring.
Use on escalators and moving walks
Direction indicators from RLS Wacon signal the direction of travel or clearance of the unit to passengers on escalators and moving walks. Depending on the operating direction, it lights up red or green and either blocks or clears entry. Depending on the version, it is installed in the balustrade, a round or square column, or a base. The bright, homogeneous LED illumination remains clearly visible even in ambient light; when de-energised, no symbols are visible. A curved, replaceable front lens and a wide input voltage range ensure robust continuous operation.
Features
- symbols and colours can be freely defined to customer requirements
- up to three switchable/displayable symbols
- available with a flat or curved front lens, diameter optionally 60, 70 or 75 mm
- long service life
- low power consumption
- wide input voltage range
- optionally with function monitoring
- shallow installation depth
Areas of application
Field of use
The multifunctional traffic light is used on the access side of escalators and moving walks and replaces several fixed indicators with one freely programmable device. It can display a direction arrow, one-way, alternating traffic and other symbols – for balustrade or square column/base as required.
Operating principle
97 evenly arranged RGB LEDs can take on any colour; symbols and colours can be freely defined to customer requirements. Up to three symbols can be switched and animated (e.g. running or flashing). Optionally with function monitoring for connection to a remote diagnostics system. Low installation depth of only 30 mm.
Installation
- Insert the traffic light into the cut-out in the balustrade or square column/base (Ø 60, 70 or 74 mm, flat or curved front lens).
- Connect the 10–28 V DC operating voltage (connecting cable 3 × 0.34 mm², or 5 × 0.34 mm² with function monitoring).
- Switch the required symbols/functions via the control (up to three symbols).
Maintenance & cleaning
- Regularly inspect the front lens and display visually.
- Clean the front lens with a soft cloth if dirty – the front lens is replaceable.
- For versions with function monitoring: check fault messages in the remote diagnostics system.
Important notes
- No symbol is visible when de-energised.
- Order fastening material separately (traffic light fastening set).
- Symbols, colours and animations are configured to customer requirements.
- Install only when de-energised.
Technical data
| Parameter | Value |
|---|---|
| Operating voltage | 10 … 28 V DC |
| Power consumption | typ. 3 VA |
| Protection class | IP 67 |
| Installation depth | 30 mm |
| Luminous intensity | typ. 50 lx (0.5 m distance) |
| Connection | 3 x 0.34 mm², length 30 cm, wire end ferrules 5 x 0.34 mm², length 30 cm, wire end ferrules |
| Article designation | Part number |
| SI7497C-F3 24 VDC | 80-001153 |
| SI7497C-F3-Check 24 VDC | 80-001154 |
| SI7497B-F3 24 VDC | 80-001155 |
| SI7497B-F3-Check 24 VDC | 80-001156 |
| SI7097C-F3 24 VDC | 80-001157 |
| SI7097C-F3-Check 24 VDC | 80-001158 |
| SI7097B-F3 24 VDC | 80-001159 |
| SI7097B-F3-Check 24 VDC | 80-001160 |
| SI6097C-F3 24 VDC | 80-001161 |
| SI6097C-F3-Check 24 VDC | 80-001162 |
| SI6097B-F3 24 VDC | 80-001163 |
| SI6097B-F3-Check 24 VDC | 80-001164 |
Flyer
Operating instructions
Similar articles:
Related products
-
- Signal light green/red
- for balustrades
- Front lens Ø 74 mm
-
Direction Indicator WS7400-W. With optional function monitoring, a white backlit triangle with a red border. High optical contrast, low power consumption, homogeneous illumination. -
ES7400 Direction Indicator. With optional function monitoring; backlit bar on a red background (one-way street symbol). High visual contrast, low power consumption, homogeneous illumination.
