WINLAB Data Line photometer in case
Portable LED photometer for water analysis with CALDUR® test sets (over 24 parameters)
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for WINLAB Data Line photometer in case:
See also:
WINLAB Data Line photometer in case
Precise water analysis – directly on site
The WINLAB Data Line photometer is a powerful, portable fourth-generation LED photometer developed specifically for water analysis in the field and in the laboratory. It is the ideal complement to the photometric CALDUR® test sets and enables an objective, digital evaluation of water samples – without subjective colour comparisons.
With nine LED wavelengths (380, 430, 470, 500, 520, 560, 610, 700 and 810 nm), the photometer covers a wide spectral range and is therefore suitable for a large number of water parameters.
Which parameters can be measured?
In combination with the CALDUR® test sets, you can determine the following parameters photometrically, among others:
- Disinfection & oxidation: chlorine (free), chlorine LR/HR (free + combined), chlorine dioxide, peroxide
- Metals: aluminium, iron (LR, LRS, HRS), chromium, copper, manganese, molybdenum
- Nutrients: ammonium, nitrate, nitrite, phosphate (LR/HR), silicate
- Organic substances: DEHA (diethylhydroxylamine), ascorbic acid, MEKO
- Others: chloride HR, sulfide, sulfite
In total, over 100 pre-programmed measuring methods are available – in addition to CALDUR®, also for reagents from other manufacturers.
What makes the WINLAB Data Line special?
- Automatic concentration determination with pre-programmed calibration curves
No manual reading from a colour chart – the photometer calculates the value digitally and reliably
- Large, backlit graphic display (128 × 64 pixels) with mineral glass cover
Readings are clearly legible even in difficult lighting conditions – scratch-resistant and robust
- Memory for up to 150 calibration curves and 1,000 measurement records
Extensive documentation directly on the device – ideal for logging and quality assurance
- Reagent instructions readable directly from the display
No searching through paper manuals – step-by-step instructions always at hand
- Waterproof housing with protected cuvette compartment
Designed for use directly at water treatment plants, wells or outdoors
- Wireless IrDA interface and USB port with documentation software
Easily evaluate, archive and process measurement data on a PC
- Battery operation with charger – ready for use immediately
Independent of the mains – ideal for mobile use and field measurements
Application
Basic operation
- Switch on the photometer and select the desired measuring method from the method memory
- Carry out the zero adjustment: insert a cuvette with untreated water sample and confirm the zero value
- Add reagents to the sample according to the instructions of the respective CALDUR® test set
- After the specified reaction time, insert the cuvette with the treated sample
- Read off the value – the concentration is calculated automatically and displayed in mg/l
The working instructions for each test set can be called up directly on the photometer display. Measurement results are automatically logged in the data memory and can be transferred to a PC via the IrDA interface or USB.
Application areas
- Drinking water monitoring
Checking limit values according to the Drinking Water Ordinance – e.g. chlorine, iron, manganese, aluminium, nitrate, nitrite
- Water treatment and swimming pool technology
Monitoring of disinfectants (chlorine, chlorine dioxide, peroxide) and corrosion inhibitors (phosphate, silicate, DEHA, MEKO)
- Boiler feed water and cooling water
Control of hardness stabilisers, oxygen scavengers (sulfite, ascorbic acid) and corrosion protection
- Wastewater and process water
Determination of heavy metals (chromium, copper, manganese) and nutrients (ammonium, nitrate, phosphate)
- Food and beverage industry
Quality control of process water and cleaning solutions
Measurable parameters with CALDUR® test sets
The following overview shows all parameters that can be determined with the WINLAB Data Line photometer in combination with the photometric CALDUR® test sets:
| Parameter | Measuring range |
|---|---|
| Aluminium | 0,02 – 0,3 mg/l |
| Ammonium | 0,1 – 3,0 mg/l |
| Ascorbic acid | 0,1 – 10 mg/l |
| Chlorine (free) | 0,05 – 1,0 mg/l |
| Chlorine LR (free + combined) | 0,05 – 1,0 mg/l |
| Chlorine HR (free + combined) | 1 – 10 mg/l |
| Chlorine dioxide | 0,05 – 0,5 mg/l |
| Chloride HR | 0,2 – 300 mg/l |
| Chromium | 0,02 – 0,7 mg/l |
| DEHA (diethylhydroxylamine) | 0,05 – 3 mg/l |
| Iron LR | 0,01 – 0,5 mg/l |
| Iron LRS | 0,01 – 0,5 mg/l |
| Iron HRS | 0,2 – 10 mg/l |
| Copper | 0,05 – 2,0 mg/l |
| Manganese | 0,05 – 20 mg/l |
| MEKO | 0,5 – 10 mg/l |
| Molybdenum | 2,5 – 100 mg/l |
| Nitrate | 0,5 – 50 mg/l |
| Nitrite | 0,02 – 1,0 mg/l |
| Peroxide | 1,0 – 100 mg/l |
| Phosphate HR | 2,5 – 100 mg/l |
| Phosphate LR | 0,4 – 5 mg/l |
| Silicate | 0,1 – 30 mg/l |
| Sulfide | 0,05 – 1,0 mg/l |
| Sulfite | 0,5 – 10 mg/l |
Technical data
| Property | Value |
|---|---|
| Light source | 9 LEDs (4th generation) |
| Wavelengths | 380, 430, 470, 500, 520, 560, 610, 700, 810 nm |
| Absorbance range | -0.500 to 3.000 |
| Electro-optical accuracy | ± 1.5 % of the reading |
| Photometric accuracy | ± 3 % at the filter |
| Display | Graphic display 128 × 64 pixels, backlit, mineral glass |
| Method memory | Up to 150 calibration curves |
| Data memory | 1,000 measurement records |
| Cuvettes | Round cuvettes 16 mm with screw cap |
| Interfaces | IrDA (wireless), USB |
| Power supply | 4 × NiMH battery (1.25 V), charger included |
| Housing | Waterproof, robust plastic housing |
| Languages | German, English, French, Spanish + 2 more |
Scope of delivery
- WINLAB Data Line photometer with 9-LED optics
- 10 round cuvettes (16 mm) with screw cap
- 4 NiMH batteries with charger
- IrDA interface
- Documentation software
- Robust plastic case
- Operating instructions
Additional information
| Product category | Testset |
|---|
