The RMS-CV-Adj radar sensor with adjustable sensitivity serves as a motion detector for approaching objects. It can be mounted directly in the application. The optimum sensitivity can then be set precisely.
Special features are:
The RMS-CV-Adj radar sensor is used in the following areas in particular:
Parameters | Value | min. | type. | max. |
Operating voltage | 10 VDC | 24 VDC | 30 VDC | |
Power consumption | 0,5 W | |||
Temperature range | – 20 °C | 60 °C | ||
Protection class | IP 67 | |||
Housing material | PC | |||
Dimensions | 56 x 46 x 22 mm |
Parameters | Value | min. | type. | max. |
Detection range | 0,5 m | 5,0 m | ||
Beam angle, horizontal | 80 ° | |||
Beam angle, vertical | 32 ° | |||
Frequency | 24 GHz | |||
Transmission power | 15 dBm EIRP | |||
Signal output | active low / optocoupler, cascadable | |||
Connection cable | 5 m LIYY 4 x 0.25 m² | |||
Direction | approximately | |||
Antenna alignment | 0° | |||
Status LED | on the back |
Standard |
ETSI EN300440-1 V1.3.1 (2001-09) |
ETSI EN300440-2 V1.1.1 (2001-09 |
VDE 0848(08/2000) Part1 |
VDE 0848(01/1991) Part2 |
ICNIRP Guidelines (04/1998) |
EN50 081-1 |
EN50 082-1 |
Color | Occupancy |
brown | + 24 V DC |
white | GND |
green | Output optocoupler – |
yellow | Output optocoupler + |
Weight | 0,0000 kg |
---|---|
Dimensions | 0,0000 × 0,0000 × 0,0000 cm |
RLS Wacon analytics GmbH
Gropiusstr. 12
31137 Hildesheim
Mon – Thu: 07:00 – 16:30
Fri: 07:00 – 13:00
© RLS Wacon analytics GmbH. Alle Rechte vorbehalten.