Step gap lighting SL800
Step gap lighting SL800. Installed underneath the steps in the entry and exit area of the escalator and illuminates the step gap in the comb area. During the continuous movement of the steps, a flashing effect is created that draws the attention of users to the escalator.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Step gap lighting SL800:
See also:
Step gap lighting SL800
The step gap lighting SL800 is installed underneath the steps in the entry and exit area of the escalator and illuminates the step gap in the comb area. During the continuous movement of the steps, a flashing effect is created that draws the attention of users to the escalator.
Use on escalators and moving walks
The step gap lighting marks the gap between the steps in the entry and exit area of the escalator. The flashing effect created draws the passengers’ attention to the step gap and increases safety when entering and leaving the unit.
Features
- 48 super bright SMD LEDs (72 LEDs SL800-RGB, 96 LEDs SLX800-RG)
- low power consumption
- very bright and homogeneous illumination
- robust and durable
Areas of application
Field of use
The SL800 step gap lighting is installed below the steps in the entry and exit areas of the escalator and illuminates the step gap in the comb area. As the steps move continuously, a flashing effect is created that draws passengers’ attention to the escalator and increases safety.
Operating principle
The SL800 uses 48 super-bright SMD LEDs at 24 V DC and provides very bright, homogeneous illumination with low power consumption. It is robust, durable, waterproof up to IP67 and designed for −20 … +60 °C. Available in yellow, green, white, warm white, blue and red as well as in variants switchable between red/green or red/green/blue.
Installation
- Position the lighting below the steps in the comb area.
- Fasten it with the clamps supplied.
- Connect the 24 V DC operating voltage according to the pin assignment.
Maintenance & cleaning
- Regularly inspect the light and the front lens visually.
- Clean the front lens with a soft, lint-free cloth if dirty.
- Robust, durable design – low maintenance effort.
Important notes
- Operating voltage 24 V DC ± 5 %.
- For switchable variants, connect the control input for colour switching.
- Install only when de-energised.
Technical data
| Parameter | Value |
|---|---|
| Operating voltage | 24 V DC +/- 5 % |
| Power consumption | 10 VA (max. 11 VA) |
| Ambient temperature | -20°C to 60 °C |
| Protection class | IP 67 |
| Dimensions | 850 x 30 x 33 mm |
| Weight | approx. 0.2 kg |
| Connection | SL800: 2×0.5mm², length 100cm SL800-RG, SLX: 3×0.5mm², length 100cm SL800-RGB: 4×0.5mm², length 100cm |
| Colour | Assignment |
| red (wire 1) | Vcc (24 V DC) |
| white (wire 2) | GND |
Additional information
| Color | Blue, Green, Red, Red / Green, RGB, Warm white, White, Yellow |
|---|---|
| Connection | 2-pole, 3-pole common earth, 3-pole common +24 VDC, 4-pole common earth |
| Number of LED strips | 1, 2 |
