Calibration solution pH 10.01
pH calibration solution with a defined buffer value of pH 10.01 for calibrating pH meters and measuring electrodes.
Private customers can also find our range in our partner store Ampha-Analyse.
Reagent for Calibration solution pH 10.01:
See also:
Calibration Solution pH 10.01
Ready-to-use buffer solution with a defined pH value of 10.01 for calibrating pH meters and measuring electrodes.
Why do you need a pH calibration solution?
pH electrodes change their measuring behaviour over time and depending on use (drift, ageing, contamination). To keep the measured values reliable, pH meters must be regularly calibrated against solutions with an exactly known pH value. The calibration solution pH 10.01 provides this defined reference value.
How do you calibrate with it?
The electrode is immersed in the buffer solution and the measured value on the device is adjusted to the target value of 10.01. For higher accuracy, a two- or three-point calibration with several buffer values is recommended (typically pH 7.01 as the zero point plus pH 4.01 and/or pH 10.01).
- Defined reference value pH 10.01
Reliable basis for accurate pH measurements
- Universally applicable
Suitable for all common pH meters and measuring electrodes
- Regular calibration
Permanently ensures accurate and reproducible results
- Ready to use
Ready for immediate use – no preparation or dilution required
- Rinse the pH electrode with distilled water and dab it dry carefully
- Pour a small amount of calibration solution into a clean container (do not measure directly in the storage bottle)
- Immerse the electrode in the pH 10.01 solution and let the value stabilise
- Calibrate the pH meter to the target value of 10.01
- For a multi-point calibration, repeat with additional buffer values (e.g. pH 7.01)
- Rinse the electrode after calibration
Tip for best results
Use the solution at room temperature if possible (approx. 25 °C) and discard the portion withdrawn after use – never pour it back into the storage bottle. This keeps the reference solution unadulterated.
Important notes
- Reseal the bottle immediately after use
- Observe the expiry date – use up opened solutions promptly
- Store in a cool, dry place protected from light
Specifications at a glance
| Property | Value |
|---|---|
| Type | pH calibration/buffer solution |
| pH value (target value) | 10.01 |
| Article number | 31-078013 |
| Application | Calibration of pH meters and measuring electrodes |
| Condition | Ready to use |
Scope of delivery
| Calibration solution pH 10.01 | 1 bottle, ready to use |
Additional information
| Weight | 0,0000 kg |
|---|---|
| Dimensions | 0,0000 × 0,0000 × 0,0000 cm |
Flyer
Operating instructions
Similar articles:
Related products
-
Hanna pHep 5Waterproof pH pocket tester Hanna pHep® 5 with integrated temperature sensor – resolution 0.01 pH, accuracy ±0.05 pH. -
Calibration solution pH 4.01pH calibration solution with a defined buffer value of pH 4.01 for calibrating pH meters and measuring electrodes.
-
Storage solutionStorage solution for storing and keeping pH electrodes moist – preserves responsiveness and extends service life.
